Xivanki Share !!: Tap detection supported by the gyroscope

Tap detection supported by the gyroscope - Selamat datang di situs media global terbaru Xivanki, Pada halaman ini kami menyajikan informasi tentang Tap detection supported by the gyroscope !! Semoga tulisan dengan kategori gyroscope !! tap !! ini bermanfaat bagi anda. Silahkan sebarluaskan postingan Tap detection supported by the gyroscope ini ke social media anda, Semoga rezeki berlimpah ikut dimudahkan Allah bagi anda, Lebih jelas infonya lansung dibawah -->

Once upon a time I made a Londroid presentation that briefly mentioned the possibility of detecting taps on the phone's body with an accelerometer (it is in slide 31). You may rightly ask, why do you want to detect taps with the accelerometer when there is the touchscreen? First, the touchscreen may be switched off by the screensaver or the user may have deactivated it because he or she is in a call or put the phone into a position where the touchscreen may be touched unintentionally. Then the user may want to tap the back of the phone. Lastly, the user may be interested in the strength of the tap, not only its location or the fact that the tap happened.

Let's recall that graph in that old Londroid presentation.



The graph shows the absolute value of the acceleration vector while the phone's body was tapped twice. The base rate is the gravity acceleration (about 10 m/sec^2) and the acceleration caused by the taps was added (in the actual configuration, subtracted) from the gravity acceleration, resulting two characteristic spikes.

But where was the phone's body tapped? By looking solely on the accelerometer's data, I don't think there is a way to find it out. But fortunately we have other sensors and the gyroscope is particularly relevant. Here is the well-known image of the sensor axes in Android.

In case of the gyroscope, the sensor measures rotation around the axes. If you tap the device in the right lower corner, we can expect a short rotation around the x and y axes if the phone supported by a reasonably flexible base (e.g. a human hand and not a block of granite).

But can this be really detected? I made a series of measurements to prove it. Note here that I was just interested in the theoretical possibility and did not want to do a product-grade implementation. So I tested only on my Galaxy Nexus.

First here is the absolute acceleration value for 3 consecutive taps.

As expected, the time of the tap can be safely detected. These taps were all in the lower right corner so let's see what the gyroscope measured along the x and y axes.

X axis, just for two taps:



Y axis, just for two taps:



As you can see, the taps are detected by the gyroscope too as short rotations. In case of both axes, there was a spike of positive rotation velocity first.

Now let's see what happens, if we tap the lower left corner.

X axis, just for two taps:

Y axis, just for two taps:

As you see, the X graph has the same character but the form of the Y graph has changed. Instead of a marked positive spike, there is a small negative spike, followed by a positive spike.

Let's see if the experience is repeated in the upper left corner.

X axis, just one tap:

Y axis, just one tap:

Now the character of the spikes on both axes changed. A small positive spike is followed by a large negative spike.

This is not a kind of movement the gyroscope was designed for so it is premature to state that this waveform pattern will be exactly the same for all the Android devices sporting gyroscope out there. But I found these measurements convincing enough to support the statement that it is possible to implement rudimentary tap location using only the accelerometer and the gyroscope in the device.